underfloor heating electric devi
garage workshop floor coatings

Comfoot Industrial Screed is a low cost, high strength, industrial levelling compound. Suitable for internal, and external applications. It is ideal for providing smooth but slip resistant surface.

Benefits include:-
Smooth run-over for fork lift and hand pallet trucks. Damage to trucks is reduced, along with driver fatigue and the possibility of spilled loads.
Attractive appearance. The natural colour is a neutral mid-grey.
Can be coated with any Comfoot resin sealers with no further treatment (other than basic cleaning) after 72 hours normal curing if a sealed surface is required.
Inherent slip resistance wet or dry, due to effect of the special resins.
Apply from 3mm up to 15mm. Large areas can be covered in a day.
Fast setting: Foot traffic after 24 hours, traffic usage after  48 hours, full strength after 7 days. dependent on weather conditions and temperature.

Priced at £32.00 + vat/delivery

Pack size 25kg powder 4 litre resin & primers Approximate Coverage: 4.5m² @ 3mm thickness or 2.7m² @ 5mm thickness and 1.35m² @ 10mm thickness
Technical Data
Flexural Strength

11.6 N/mm²

BS6319, PT 37: 1990

 
Tensile Strength

5.2 N/mm²

BS6319, PT 7: 1985

 
Compressive Strength

29.0 N/mm²

BS6318, PT 2: 1983

 
Note: Above Tested at 28 days at 23°C/50% RH
 
Density (g/cc)

2.04

 
 
Water Uptake (%)

1.2

 
 
Coutinho Ring Test

No cracks after 28 days

 
 
Adhesion To Concrete

Conforms to BS8204 PT 3: 1993

 
Slip Resistance

(in accordance with)

BS8204 PT 3: 1993

Wet: 60-62
Dry: 79-82
The results indicate good slip resistance.
 
Limpet Adhesion Tests (N/mm²)
3 days dry 1.41.
14 days dry 2.52.

14 days dry, 7 days wet 1.64

 

LOOKING FOR SOMETHING DIFFERENT?

QUICK LINKS

DOMESTIC UNDER FLOOR HEATING

UNDER FLOOR STORAGE HEATING

DEVIHEAT 550 THERMOSTAT  

MAT PLANNER

TOWEL RAILS

LAMINATE FLOORS   

HEATING WITH ANY COVERING  

EPOXY COATINGS

HOLE REPAIR

COMFOOT SHOPPING ZONE